高速婴儿尿裤：（NK300）
Production line for baby diaper
主要功能和特点：
Main functions and features:
1. 传动部位，可采用德国欧皮特同步带，圆弧齿轮，齿轮箱相结合，关键部位采用了日本“NSK”轴承，电器采用了日本“三菱”和德国“西门子”实现设备传动平稳，寿命延长。功能完整，可生产经济型，*型尿裤产品，更换少数零件可生产大，中，小三种规格，换号极为方便。
1.Driving system consists of synchronous belt ( Optibelt, made in Germany) and round arc gear combined with gear case; The key parts adopt “NSK” bearing (made in Japan) for smooth transmission, prolonging the lifetime of the machine. The functions are complete. It can produce diapers of economic type and high grade. It can produce three types of products(L,M,S)with a few parts changed. Changing is very easy.
2. 高分子定量定位施加，也可混合施加。
SAP may be supplied at a fixed amount in designed locations or in a mixing way.
3.弹性腰围、前腰贴、侧腰贴施加。
It has elastic waist, frontal waist tape and side waist tape.
4.网面三片式立体防漏护边，两侧橡筋施加立体护围面料在机分切，热压、胶粘混合成型。It has three-piece standing cuffs on the surface .Material for stereo shield is cut and shaped by hot press on the equipment. It adheres to elastic ribbon to be formed for side leakage proof.
5. 转体可实现不停机相位调整
The phase may be adjusted without stopping machine.
6. 主要原材料采用主动开卷恒张力系统，热压系统采用气动装置。可以配自动换接料功能。
Main raw materials are used with unwound, tension control system and can be filled or changed automatically.
7. 侧边圆弧成型后经合翼纵向三折，整列输出，方便包装。
After the side arcs are shaped, the wings will be three-folded lengthwise. The diaper pads will be output in line and easy for packing.
8. 可兼做三种规格（L，M，S）尿片产品。
It can produce 3 sizes of diapers and diaper pad.
9．具有前腰，侧腰贴，弹性腰围施加功能。
It has frontal waist tape, side waist tape and elastic waist .
主要技术参数：
1．型 号 ：JWC—NK300
2．设计单片速度：250-300片/分钟
3．装机功率：145KW（380V 50HZ）
4．外型尺寸：24米×2.5米×3米（长×宽×高）
5. 设备重量：约33吨
6．产品规格：长×宽（注：可定做规格）
小号：380×270mm 中号：450×310mm 大号：515×330mm 特大号：540×340 mm
Main Technical Parameters:
1. Type: JWC-NK300
2. Design output:250-300 pieces/min
3. Installation capacity:145KW(380V 50Hz)
4. Overall dimension:24m*2.5m*3m (length*width*height)
5. Total weight:33T
6. Equipment specification:(length*width) ( it can as your order )S:380mm*270mm M:450mm*310mm L:515mm*330mm XL：540×340 mm
Optional Device：
1. Non-stop automatic and half-automatic material inception devices and tension control devices.
2. PLC which can help draw up working procedure.
3. Automatic position-limit adjusting device which can inspect quality ,do calculation and reject wasters by using photo-electrical cells. (Materials can be adjusted lengthways.)
4. Touchable screen with which you can communicate with the machine.
可选配置：
1．可增配自动，半自动不停机接料装置，张力控制装置。
2．可增添PLC控制，可编程。
3．可增加自动限位调整，（原材料纵向调整）采用光电检测，并自动剔废品，光电计数.
4．可增加触摸屏方式或工控机（电脑），实现人机对话。
5. 可以配堆垛机，自动计数包装。
