技术参数
66ECO 56ECO
切割宽度 670mm/26.38in 560mm/22.05in
深度 670mm/26.38in 560mm/22.05in
高度 80mm/3.15in 80mm/3.15in
压力 180dan/397lbs 180dan/397lbs
速度 70mm/sec/2/76in/sec 70mm/sec/2/76in/sec
长宽高 1,250x1,825x1,500mm/49.21x71.85x59.06in 1,150x1,670x1,500mm/45.28x65.75x59.06in
重量 675kg/1488lbs 575kg/1,268lbs
电力输入 2.4kva 2.2kva
坚固的、可编程刀与液压传动和5、5“单色显示。
Sturdy, programmable cutter with hydraulic drive and 5,5“
客户利益
*的编程选项和一个内存容量
198项目的
容易刀改变自动中断在低死胡同和刀微调从前面
机架与优化稳定性的*佳吸收的切削力和*大的切割精度
*小维修需求由于使用新颖材料
描述机器的
刀具极地56是专为一个转变
操作。精确的和温和的swing进行削减
出液压。因此,花的时间在低刀死胡同可以适应材料。佣不锈钢表表面可以很容易地处理材料甚至没有空气喷气机。在很宽的范围内调整范围夹紧压力可以调节无限到每个切割材料通过车削旋钮和规模。明亮的发光二极管马克切割线清晰可见的运营商。
机器的操作是通过一个人体工程学定位控制面板与5.5“单色显示和额外的薄膜按键。重复切割序列可记忆(内存容量198计划)和在任何时间适应。削减项目的创建完成手动或菜单驱动的和直观地通过块编程。优化切割质量的pre夹紧的时间可以根据根据材料。
Easy knife change with automatic interruption in the lower dead end and knife fine adjustment from the front
Machine frame with optimized stability for optimum absorption of cutting forces and greatest cutting accuracy
Minimal maintenance requirements due to the use of novel materials
Description of the machine
The cutter POLAR 56 is designed for one-shift
operation. The precise and gentle swing cut is carried
out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator.
The operation of the machine is done via an ergonomically positioned control panel with 5.5’’ monochrome display and additional membrane keypad. Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming. To optimize the cutting quality the pre-clamping time can be adjusted according
Sturdy, programmable cutter with hydraulic drive and 5,5“ monochrome display.
Customer benefits
Extensive programming options with a memory capacity
of 198 programs
Easy knife change with automatic interruption in the lower dead end and knife fine adjustment from the front
Machine frame with optimized stability for optimum absorption of cutting forces and greatest cutting accuracy
Minimal maintenance requirements due to the use of novel materials
Description of the machine
The cutter POLAR 56 is designed for one-shift
operation. The precise and gentle swing cut is carried
out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator.
The operation of the machine is done via an ergonomically positioned control panel with 5.5’’ monochrome display and additional membrane keypad. Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming. To optimize the cutting quality the pre-clamping time can be adjusted according to the material.
