Loctite 5366 has been designed specifically for use as a bonding agent to ensure perfect sealing, as well as bonding and protection. Typical applications include sealing side windows in trains, sealing heat sources (ovens, heat exchangers, steam circuits, water heaters), providing protection/insulation of electrical boxes, bonding of HCR silicones and in the general care and maintenance applications in various fields. This product is typically used in applications up to 250℃.
Appearance (uncured): Clear paste
Surface Cure: Loctite 5366 becomes tack free on exposure to atmospheric moisture within 5 minutes at 23±2℃ / 50±5%RH.
Directions for use
1. For best performance bond surfaces should be clean and free from grease.
2. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
3. When joint is assembled pressure should be applied to spread the adhesive out and fill the joint completely.
4. The bond should be allowed to cure (e.g. seven days),before subjecting to heavy service loads.
Optimal Storage: 8℃ to 21℃. Storage below 8℃ or greater than 28℃ can adversely affect product properties.
'